Certificate IV in Video and Audio Systems
This qualification covers servicing high-end audio, video and display systems, including high-definition TV. Work includes fault finding and repairing power supplies, amplifiers, digital parts and TV receivers. If you already repair audio and video equipment, your experience could be recognised through RPL.
- TRAINING PACKAGE
- UEE Electrotechnology
- ENTRY REQUIREMENTS
- Nil
- SUPERSEDES
- UEE41511 Certificate IV in Video and Audio Systems (equivalent)
WHO IT'S FOR
People who service and repair audio, video or TV equipment and want their technical skills formally recognised.
TYPICAL JOB ROLES
- Audio visual technician
- Video and audio technician
- TV repair technician
- Electronics service technician
Qualification structure
A total of 1280 weighting points comprising: 840 core weighting points listed below; plus 440 general elective weighting points from the general elective units listed below. Choose a total of 440 weighting points elective units from the list below, of which between 0 and 140 weighting points can be taken from Group A; and between 0 and 220 weighting points must be taken from Group B; and between 220 and 440 weighting points must be taken from Group C; or all 440 weighting points can be taken from Group C. Up to 220 weighting points of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC). There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume. Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.
Core units
17 units- UEECD0007Apply work health and safety regulations, codes and practices in the workplace
- UEECD0010Compile and produce an energy sector detailed report
- UEECD0016 (has a prerequisite)Document and apply measures to control WHS risks associated with electrotechnology work
- UEECD0019 (has a prerequisite)Fabricate, assemble and dismantle utilities industry components
- UEECD0024Implement and monitor energy sector WHS policies and procedures
- UEECD0027Participate in development and follow a personal competency development plan
- UEECD0043 (has a prerequisite)Solve problems in direct current circuits
- UEEEC0028 (has a prerequisite)Fault find and repair complex power supplies
- UEEEC0058 (has a prerequisite)Repair predictable faults in television receivers
- UEEEC0060 (has a prerequisite)Repairs basic electronic apparatus faults by replacement of components
- UEEEC0063 (has a prerequisite)Solve fundamental electronic communications system problems
- UEEEC0066 (has a prerequisite)Troubleshoot amplifiers in an electronic apparatus
- UEEEC0067 (has a prerequisite)Troubleshoot basic amplifier circuits
- UEEEC0069 (has a prerequisite)Troubleshoot digital sub-systems
- UEEEC0074 (has a prerequisite)Troubleshoot resonance circuits in an electronic apparatus
- UEEEC0075 (has a prerequisite)Troubleshoot single phase input d.c power supplies
- UEERE0015Implement and monitor energy sector environmental and sustainable policies and procedures
This unit has a prerequisite unit. Check the unit on training.gov.au for details.
Elective units
79 unitsGroup A: Imported and common elective units.
- BSBOPS203Deliver a service to customers
- ICTICT214Operate application software packages
- UEECD0011Comply with scheduled and preventative maintenance program processes
- UEECD0035Provide basic instruction in the use of electrotechnology apparatus
- UEECO0002Maintain documentation
- UEECO0015Provide quotations for installation or service jobs
- UEECO0017Source and purchase material/parts for installation or service jobs
Group B: Qualification elective units.
- UEEAS0001 (has a prerequisite)Assemble electronic components
- UEEAS0006 (has a prerequisite)Use lead-free soldering techniques
- UEECD0020 (has a prerequisite)Fix and secure electrotechnology equipment
- UEECD0021 (has a prerequisite)Identify and select components, accessories and materials for energy sector work activities
- UEECD0025 (has a prerequisite)Lay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuits
- UEECD0028 (has a prerequisite)Plan an integrated cabling installation system
- UEECD0040 (has a prerequisite)Solve basic problems electronic and digital equipment and circuits
- UEECD0051 (has a prerequisite)Use drawings, diagrams, schedules, standards, codes and specifications
- UEECS0003 (has a prerequisite)Assemble, set up and test computing devices
- UEECS0018Develop web pages for engineering applications
- UEECS0022Install and configure a client computer operating system and software
- UEECS0028Select, install, configure and test multimedia components
- UEECS0029 (has a prerequisite)Set up and configure basic local area network (LAN)
- UEECS0030Set up, configure and test biometric devices
- UEECS0032Support computer hardware and software for engineering applications
- UEECS0033Use engineering applications software on personal computers
- UEEDV0004 (has a prerequisite)Install and connect data and voice communication equipment
- UEEDV0005 (has a prerequisite)Install and maintain cabling for multiple access to telecommunication services
- UEEDV0006 (has a prerequisite)Install and modify optical fibre performance data communication cabling
- UEEDV0008 (has a prerequisite)Install, modify and verify coaxial and structured communication copper cabling
- UEEDV0009 (has a prerequisite)Select and arrange data and voice equipment for local area networks
- UEEDV0010 (has a prerequisite)Select and arrange equipment for wireless communication networks
- UEEDV0011 (has a prerequisite)Set up and configure basic data communication systems
- UEEDV0012Set up and configure the wireless capabilities of communications and data storage devices
- UEEDV0013 (has a prerequisite)Solve problems in voice and data communications circuits
- UEEDV0014 (has a prerequisite)Test, report and rectify faults in data and voice installations
- UEEEC0002 (has a prerequisite)Assemble and install reception antennae and signal distribution equipment
- UEEEC0003 (has a prerequisite)Assemble and set up basic security systems
- UEEEC0004 (has a prerequisite)Assemble and set up fixed video/audio components and systems in buildings and premises
- UEEEC0006 (has a prerequisite)Carry out repairs of predictable faults in video and audio replay/recording apparatus
- UEEEC0019 (has a prerequisite)Develop software solutions for microcontroller-based systems
- UEEEC0027 (has a prerequisite)Enter instructions and test wired and wireless security systems
- UEEEC0029 (has a prerequisite)Fault find and repair electronic apparatus
- UEEEC0032 (has a prerequisite)Fault find and repair high-volume office equipment
- UEEEC0038 (has a prerequisite)Find and repair microwave amplifier section faults in electronic apparatus
- UEEEC0039 (has a prerequisite)Install and test microwave antennae and waveguides
- UEEEC0040 (has a prerequisite)Install commercial video/audio system components
- UEEEC0042 (has a prerequisite)Install large security systems
- UEEEC0048 (has a prerequisite)Program and commission commercial access control security systems
- UEEEC0049 (has a prerequisite)Program and commission commercial security closed-circuit television systems
- UEEEC0050 (has a prerequisite)Program and commission commercial security systems
- UEEEC0055 (has a prerequisite)Repair basic computer equipment faults by replacement of modules/sub-assemblies
- UEEEC0056 (has a prerequisite)Repair predictable faults in audio components
- UEEEC0057 (has a prerequisite)Repair predictable faults in general electronic apparatus
- UEEEC0059 (has a prerequisite)Repair routine business equipment faults
- UEEEC0061 (has a prerequisite)Set up and adjust commercial radio frequency (RF) transmission and reception systems
- UEEEC0062 (has a prerequisite)Set up and test residential video/audio equipment
- UEEEC0064 (has a prerequisite)Solve oscillator problems
- UEEEC0065 (has a prerequisite)Solve problems in basic electronic circuits
- UEEEC0068 (has a prerequisite)Troubleshoot communication systems
- UEEEC0070 (has a prerequisite)Troubleshoot faults in television receivers
- UEEEC0072Troubleshoot microcontroller-based hardware systems
- UEEEC0073 (has a prerequisite)Troubleshoot professional audio reproduction components
- UEEEC0077 (has a prerequisite)Verify functionality and compliance of custom electronic installations
- UEEIC0002 (has a prerequisite)Assemble, enter and verify operating instructions in microprocessor equipped devices
Group C: Qualification elective units.
- ICTPRG444Analyse software requirements
- UEECD0047Supervise and coordinate energy sector work activities
- UEECO0001Estimate electrotechnology projects
- UEECO0013Prepare specifications for the supply of materials and equipment for electrotechnology projects
- UEECS0002Analyse and implement biometric measuring techniques and applications
- UEECS0020Evaluate and modify object-oriented code programs
- UEEEC0012 (has a prerequisite)Design custom electronic equipment installations
- UEEEC0015 (has a prerequisite)Develop basic plans for integrating security systems
- UEEEC0022 (has a prerequisite)Diagnose and rectify faults in camera circuits and equipment
- UEEEC0023 (has a prerequisite)Diagnose and rectify faults in digital transmission circuits and systems
- UEEEC0024 (has a prerequisite)Diagnose and rectify faults in electronic display circuits
- UEEEC0025Diagnose and rectify faults in recording and replay equipment
- UEEEC0030 (has a prerequisite)Fault find and repair electronic medical equipment
- UEEEC0037 (has a prerequisite)Fault find and repair telecommunication apparatus and systems
- UEEEC0051 (has a prerequisite)Program and commission commercial video/audio systems
- UEEEC0052 (has a prerequisite)Program and test large security systems
- UEEIC0012 (has a prerequisite)Develop structured programs to control external devices
This unit has a prerequisite unit. Check the unit on training.gov.au for details.
EVIDENCE YOU'LL NEED
- Resume showing your work history
- Reference letters from employers
- Photos or videos of jobs you've done
- Payslips or employment contracts
LICENSING
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
View on training.gov.au(opens in a new tab)